Shake (sensor)

Shake (sensor)

Regular price $5.00 Sale

Sensor-Shake is a shake detection sensor module.

Shake sensor is for detect the mechanical vibration quantity of objects.

*Compatible with the DIY and mCookie series.

Introduction of Sensor Pin

Shake Sensor
General Pin Out Sensor / Trinket's Pin Out
PIN1 (GND) GND
PIN2 (VCC) VCC
PIN3 (SIGNAL-A) Digital Input
PIN4 (SIGNAL-B) Not Connected
  • General Pin Out is the standard pin out of a Sensor / Trinket connector.
  • Sensor / Trinket's Pin Out is this specific Sensor / Trinket's wiring in relation to the General Pin Out.
  • SIGNAL-A / SIGNAL-B are signals that could be digital input, digital output, analog input or analog output. Or special signals such as serial communication (SoftwareSerial, IIC (I2C), etc) or other special signals.
  • Not Connected refers to the Pin not being used for this particular Sensor / Trinket.
  • Read more about the hub module.

Features

  • With small size which is easy to install;
  • With good detection sensitivity;
  • With adjustable detection sensitivity.

Specification

  • Sensor voltage
    • 3.3V~5V working voltage
  • Size of the sensor
    • Size of the board: 23.5mm*13mm
    • 1.27mm-spacing 4Pin interface connected with sensorhub
    • CAD drawing of the sensor: File:Sensor CAD.zip
  • Function description
    • The static signal of the sensor is LOW. When the shake occurs, the sensor will produce signal HIGH.
  • Connection
    • This sensor can be connected to the following interfaces of the core: D2~D13, A0~A7